1.2363 (X100CrMoV5) Tool Steel
1.2363 (X100CrMoV5)
1.2363 (X100CrMoV5) (P5M) is an air-hardened, special cold work tool steel. It serves as a bridge between medium alloy and high alloy cold work steels.
Manufactured by Dörrenberg Edelstahl.
What is 1.2363 (X100CrMoV5) (P5M) Material?
1.2363 (X100CrMoV5) (P5M) is an air-hardened, special cold work tool steel. It serves as a bridge between medium alloy and high alloy cold work steels.
1.2363 steel material possesses properties such as toughness, wear resistance, machinability, high hardenability, minimal dimensional change during heat treatment, full hardening capability, and very high compressive strength.
What is the Hardness Value of 1.2363 (X100CrMoV5) (P5M) Steel?
1.2363 (X100CrMoV5) tool steel can reach a hardness of up to 58 Rockwell (HRC) in heat treatment furnaces.
What are the Mechanical Properties of 1.2363 (X100CrMoV5) (P5M) Steel?
You can find the material properties of 1.2363 (X100CrMoV5) in the "Technical Details" tab. All mechanical and material properties of 1.2363 (X100CrMoV5) steel are specified within this tab.
Where is 1.2363 (X100CrMoV5) (P5M) Steel Used?
1.2363 (X100CrMoV5) tool steel is used in places such as sheet metal cutting molds up to 6 mm, punches, pipe and profile rolls, scissors blades, thread rolling dies, minting molds, pattern molds, plastic crusher blades, paper knives, and bending molds.
What is the Price of 1.2363 (X100CrMoV5) (P5M) Material?
The price of 1.2363 (X100CrMoV5) material varies depending on the product section, size, and surface quality. To access the prices of 1.2363 (X100CrMoV5) steel, you can use the "Switch to Online Sales" button on the homepage of www.saglammetal.com.
Chemical Composition
Code: 1.2363, P5M, X100CrMoV5
Carbon |
Chromium |
Molybdenum |
Vanadium |
C |
Cr |
Mo |
V |
1,00 |
5,30 |
1,10 |
0,25 |
Heat Treatment
|
|
Temperature |
Cooling |
Hardness |
Soft Annealing |
800 - 840 °C |
Furnace |
241 HB |
Stress Relief Annealing |
600 - 650°C |
Furnace |
|
Hardening |
950 - 980°C |
oil, pressure gas (N2), air or hot bath 500 - 550°C |
see tempering diagram |
Mechanical Properties
Hardness |
54 - 60 |
HRC |
Physical Properties
Coefficient of thermal expansion |
11,6 - 13,7 |
1/K * 10-6 |
Thermal conductivity (20°C) |
15,8 |
W/mK |
Density |
7,85 |
g/cm3 |
